Listen to this page
YLT 220S Flat / Round Hot Stamping Machine
The YLT 220S is a pneumatic foil stamping model for flat and round products, with a 150×220 mm heated plate and 1,000 W heating power.
Technical specifications
| Model | YLT 220S |
|---|---|
| Drive system | Pneumatic · microcomputer controlled |
| Print area | 150×220 mm heated plate |
| Catalogue print speed | 1200 pcs/hour |
| Air / pressure | 4–7 bar · <130 kgf |
| Power supply | 220 V · 50 Hz · 1000 W heating |
| Temperature range | Ambient–320 °C |
Specifications are based on the source catalogue. The 3D model is for presentation and layout, not fabrication. Confirm dimensions and configuration before ordering.
- Pneumatic · microcomputer controlled
- 150×220 mm heated plate
- 1200 pcs/hour
The YLT 220S is a microcomputer-controlled pneumatic model offered for foil stamping flat and round products. Its technical record lists a 150×220 mm heated plate and 1,000 W heating power. Assess the surface shape, stamping die and selected foil together to define the intended application.
Setup for the surface shape
Flat products require adequate support opposite the die, while round products require assessment of the contact region and product axis. Mark the drawing if a logo must start relative to a particular edge or seam. Define fixture requirements from samples rather than assuming that one holder will accommodate products of different diameters and shapes.
Assessing foil transfer
The recorded temperature range extends from ambient temperature to 320 °C. Establish a suitable setting through sample applications using the actual surface and foil. Contact time and pressure settings should also be assessed against the result. Sample checks include clear fine lettering, complete transfer across solid areas and the required surface appearance.
Changeovers and production
Connection requirements are 4–7 bar air pressure and a 220 V / 50 Hz supply. The catalogue speed is 1,200 pieces per hour. Include preparation time in the daily schedule when fixtures, dies or foil must be changed between flat and round jobs. Recording the approved sample alongside its application settings makes initial checks easier when the same job returns.
Related models
Other options in the same product group.
YLT-168 Flat / Round Hot Stamping Machine
- Pneumatic · microcomputer controlled
- 100×168 mm heated plate
Let’s review your project together.
YLT 220S · Choose your needs, share the details and send your enquiry from one place.
