Skip to content
Listen to this page

YLT-168 Flat / Round Hot Stamping Machine

The YLT-168 is a microcomputer-controlled pneumatic hot stamping model for flat and round products, with a 100×168 mm heated plate.

1 / 5
YLT-168 · Product images
1 / 5Arrow keys to browse · Esc to close
Explore the 3D model

Technical specifications

ModelYLT-168
Drive systemPneumatic · microcomputer controlled
Print area100×168 mm heated plate
Catalogue print speed1200 pcs/hour
Air / pressure4–7 bar
Power supply220 V · 50 Hz · 900 W heating
Temperature rangeAmbient–280 °C
Work table127×220 mm
Head stroke25 mm
Air consumption<40 L/min
Machine dimensions (L×W×H)530×580×1385 mm
Workpiece heightSource values differ; confirmation is required with the quotation
Stamping force<130 kgf

Specifications are based on the source catalogue. The 3D model is for presentation and layout, not fabrication. Confirm dimensions and configuration before ordering.

  • Pneumatic · microcomputer controlled
  • 100×168 mm heated plate
  • 1200 pcs/hour

The YLT-168 is a microcomputer-controlled pneumatic machine offered for hot stamping flat and round products. The recorded heated plate measures 100×168 mm, while the worktable measures 127×220 mm. The heated section and the table supporting the product serve different purposes; their dimensions should not be treated as interchangeable during selection.

Preparing for two surface shapes

Flat and round products contact the die differently. Product support, holders and the die must be selected for the application. Round work requires assessment of diameter, print origin and artwork position around the surface; flat work requires a reference edge and surface support. When both product types are planned, define the required fixtures separately.

Foil and temperature selection

The technical record specifies a range from ambient temperature to 280 °C. Determine the operating temperature through trials using the selected foil and actual product surface. Assess fine lettering, transfer across solid areas and the appearance of the surface together. This evaluates the completeness of the application as well as its colour effect.

Production arrangements

Recorded requirements are 4–7 bar air pressure, a 220 V / 50 Hz supply and 900 W heating power. The catalogue speed of 1,200 pieces per hour is a reference separate from loading and unloading time. Plan fixture and setting changes when switching from flat to round work, and check the beginning of each job against an approved sample.

Related models

Other options in the same product group.

A QUOTATION FOR YOUR NEEDS

Let’s review your project together.

YLT-168 · Choose your needs, share the details and send your enquiry from one place.

Prepare my enquiry
Contact usCall • WhatsApp
ŞAHİNER PRINTERLet’s plan together.

Talk to us about machine selection or your printing project.

Message on WhatsApp+90 532 708 71 97 Open our location